Tile Xtraa TX 315 | Premium Tile Adhesives by Sakarni

Tile Xtraa TX 315

Premium White Cementitious Tile & Stone Adhesive

Sakarni Tile Xtraa TX 315 is a professional-grade, white cement-based, high-performance polymer-modified adhesive engineered for heavy-duty tile and stone installations. Powered by advanced Hydro Holder Strong Bond Technology, it provides exceptional multi-surface adhesion, excellent slip resistance, and high water resistance. Its premium white cement matrix is specifically formulated to prevent shadow staining in translucent marbles and light-colored stones, making it the ideal self-curing solution for premium high-build architectural projects.

Hydro Holder
Hydro Holder
Strong Bond
Advance Technology
White Base
White Base
Non-Staining
Stone Formulation
0%
0%
Water Curing
Required

Engineered to Protect Premium White Marble and Translucent Glass Tiles from Shadowing & Staining

Conventional Grey Mortars

Traditional systems often suffer from:

Grey cement bleed-through causing shadow staining and discoloration in light stones
High drying shrinkage leading to microscopic stress cracks and tile pop-outs
Poor tackiness resulting in sliding during vertical wall installations

Tile Xtraa TX 315

It is specially formulated to provide:

High-purity white cement core that completely preserves the natural brilliance of light stones
Advanced polymer crystallization preventing structural shrinkage and under-tile hollow spots
Outstanding water-resistant properties perfect for high-moisture stone applications
Self-curing mechanism that eliminates post-installation watering schedules entirely

Key Benefits

Key Benefits

Hydro holder strong bond
White cement non-staining base
Highly water resistant formula
No wet site curing needed
Prevents marble shadow staining
Excellent vertical non-sag grip

Hydro holder strong bond
White cement non-staining base
Highly water resistant formula
No wet site curing needed
Prevents marble shadow staining
Excellent vertical non-sag grip

No wet site curing needed
Prevents marble shadow staining
Excellent vertical non-sag grip

where to use

1
Premium Stone Layouts
Translucent white marble floor slabs
Light-colored granite stone tile matrices
Engineered quartz and composite tile sheets
2
Glass & Mosaic Tiling
Decorative glass mosaic tile walls
Designer swimming pool internal mosaics
Bathroom ornamental glass tile borders
3
Interior Walls & Floors
Luxury residential master bathroom spaces
Commercial kitchen dado wall zones
Premium hotel lobby floor backgrounds

1
Premium Stone Layouts
Translucent white marble floor slabs
Light-colored granite stone tile matrices
Engineered quartz and composite tile sheets
2
Glass & Mosaic Tiling
Decorative glass mosaic tile walls
Designer swimming pool internal mosaics
Bathroom ornamental glass tile borders
3
Interior Walls & Floors
Luxury residential master bathroom spaces
Commercial kitchen dado wall zones
Premium hotel lobby floor backgrounds

application process

Surface Preparation

Clean the floor or wall masonry background completely to remove all dust, grease, laitance, sealers, and loose particles.

Ensure that all concrete substrates or cement renders are fully cured, stable, and geometrically true before starting work.
Wipe the rear installation face of the marble or mosaic tile with a clean damp cloth to remove residual quarry dust.
Dampen porous masonry backgrounds slightly with potable water, ensuring no standing fluid film or puddles remain.

Application

Mix the white adhesive powder with a measured volume of clean potable water using a mechanical slow-speed paddle mixer.

Allow the homogeneous, creamy white paste to slake inside the mixing container for five minutes, then blend it briefly once more.
Trowel the mixed white adhesive paste firmly onto the structural background using the flat edge of a notched trowel.
Comb the wet bed with a suitable notched profile tool at a sixty-degree angle to produce uniform parallel ribs.

FInishing

Press the white marble stone or glass tiles firmly into the ribbed wet white adhesive bed with an adaptive sliding movement.

Use a rubber mallet or grout float to tap the stone sections smoothly, guaranteeing complete back-surface wetting.
Clean out any wet adhesive squeezing out into the joint channels immediately using a damp sponge or cloth.
Allow the completed stone matrix to cure undisturbed for twenty-four hours before initiating joint grouting operations.

Surface Preparation

Clean the floor or wall masonry background completely to remove all dust, grease, laitance, sealers, and loose particles.

Ensure that all concrete substrates or cement renders are fully cured, stable, and geometrically true before starting work.
Wipe the rear installation face of the marble or mosaic tile with a clean damp cloth to remove residual quarry dust.
Dampen porous masonry backgrounds slightly with potable water, ensuring no standing fluid film or puddles remain.

Application

Mix the white adhesive powder with a measured volume of clean potable water using a mechanical slow-speed paddle mixer.

Allow the homogeneous, creamy white paste to slake inside the mixing container for five minutes, then blend it briefly once more.
Trowel the mixed white adhesive paste firmly onto the structural background using the flat edge of a notched trowel.
Comb the wet bed with a suitable notched profile tool at a sixty-degree angle to produce uniform parallel ribs.

FInishing

Press the white marble stone or glass tiles firmly into the ribbed wet white adhesive bed with an adaptive sliding movement.

Use a rubber mallet or grout float to tap the stone sections smoothly, guaranteeing complete back-surface wetting.
Clean out any wet adhesive squeezing out into the joint channels immediately using a damp sponge or cloth.
Allow the completed stone matrix to cure undisturbed for twenty-four hours before initiating joint grouting operations.

Important Note

Surface Preparation

Surface Preparation

Apply only on properly prepared and clean masonry backdrops using white-base compatible tiles. Follow recommended surface preparation and application practices to achieve optimum durability and a flawless finish.

Technical properties

Property	Description
Product Type	White Cementitious Tile Adhesive
Appearance	White Fine Granular Powder
Finish	Non-Staining Solid Under-Bed
Key Feature	Hydro Holder Non-Discoloring Bond
Water Resistance	High
Sag Resistance	Outstanding
Color Stability	Non-Bleeding Core
Open Time	High Workability Range
Application Method	Notched Trowel
Surface Compatibility	Concrete, Cement Plaster & Masonry
Application Area	Light Stones, Marbles, and Glass Mosaics
Packing	Available in Standard Packs
Shelf Life	As per sealed pack conditions

Property	Description
Product Type	White Cementitious Tile Adhesive
Appearance	White Fine Granular Powder
Finish	Non-Staining Solid Under-Bed
Key Feature	Hydro Holder Non-Discoloring Bond
Water Resistance	High
Sag Resistance	Outstanding
Color Stability	Non-Bleeding Core
Open Time	High Workability Range
Application Method	Notched Trowel
Surface Compatibility	Concrete, Cement Plaster & Masonry
Application Area	Light Stones, Marbles, and Glass Mosaics
Packing	Available in Standard Packs
Shelf Life	As per sealed pack conditions

Explore More of Sakarni's Catalogue

Explore More of Sakarni's Catalogue

Frequently Asked Questions

1. What is it used for?

2. Can it be used outdoors?

3. Why should I use this over standard grey adhesive?

4. Is it ready to use or does it require mixing?

5. Does it require pre-soaking of tiles?

6. How long before the floor can be grouted?

Download our Apps

Sakarni Premium Club

iMIdAS-Sakarni Bandhan

Follow Our Journey

© 2026 All Rights Reserved. Sakarni Plaster Pvt Ltd. Cookie Preferences