Tile Adhesive SA 109 | Premium Tile Adhesives by Sakarni

Tile Adhesive SA 109

General Purpose Cementitious Tile Adhesive

Sakarni Tile Adhesive SA 109 is a professional-grade, polymer-modified cementitious tile adhesive engineered for general-purpose applications on interior floors and walls. Powered by advanced Hydro Holder Strong Bond Technology, it establishes an excellent surface grip, high-build bedding stability, and reliable water resistance. It completely eliminates the need for traditional on-site tile soaking or post-installation water curing, offering a cost-effective and highly productive choice for modern residential and commercial construction projects.

Hydro Holder
Hydro Holder
Strong Bond
Advance Technology
High
High
Productivity
& Time Saving
0%
0%
Water Curing
Required

Engineered to Protect Standard Tiled Layouts from Hollow Trapped Pockets, Sagging & Debonding

Conventional Site-Mixed Mortars

Traditional systems often suffer from:

Poor water retention resulting in weak bonding and rapid tile pop-outs
Heavy shrinkage during drying that creates under-tile hollow spots
Lack of adequate tackiness leading to messy sliding on vertical surfaces

Tile Adhesive SA 109

It is specially formulated to provide:

High polymer-modified mechanical grab that secures interior wall tiles without slipping
Homogeneous, non-shrink bed consistency that entirely eliminates hollow sounds
Balanced water-retention properties perfectly suited for high-moisture floor bases
Modern self-curing mechanism that significantly optimizes site labor timelines

Key Benefits

Key Benefits

Hydro holder strong bond
General purpose tile setting
Highly water resistant matrix
No site curing needed
Exceptionally cost effective choice
Excellent vertical non-sag grip

Hydro holder strong bond
General purpose tile setting
Highly water resistant matrix
No site curing needed
Exceptionally cost effective choice
Excellent vertical non-sag grip

No site curing needed
Exceptionally cost effective choice
Excellent vertical non-sag grip

where to use

1
Floor Installations
General residential ceramic floor tiling
Standard commercial corridor floor layouts
Clay and terracotta floor tile layouts
2
Interior Walls
Residential bathroom and restroom walls
Kitchen decorative dado tile borders
Utility room internal masonry partitions
3
Home Renovations
Replacing old damaged floor tiles
Modernizing internal residential laundry zones
Refurbishing small residential utility balconies

1
Floor Installations
General residential ceramic floor tiling
Standard commercial corridor floor layouts
Clay and terracotta floor tile layouts
2
Interior Walls
Residential bathroom and restroom walls
Kitchen decorative dado tile borders
Utility room internal masonry partitions
3
Home Renovations
Replacing old damaged floor tiles
Modernizing internal residential laundry zones
Refurbishing small residential utility balconies

application process

Surface Preparation

Clean the floor or wall concrete background thoroughly to eliminate all dust, dirt, loose plaster particles, oils, and grease.

Correct major surface irregularities, deep crevices, and layout depressions using a polymer-modified repair mortar.
Ensure that the target masonry substrate is completely dimensionally stable, flat, and fully cured before application.
Dampen highly porous or hot cement renders lightly with fresh water and wait for the surface moisture film to evaporate.

Application

Mix the dry tile adhesive powder slowly with a measured quantity of clean potable water using a mechanical stirrer tool.

Let the smooth, lump-free paste rest in the bucket for five minutes to mature, then give it a quick remix before use.
Spread the mixed adhesive paste firmly onto the structural surface using the flat edge of a suitable notched trowel.
Comb the wet mortar bed immediately with the notched side of the trowel at a sixty-degree angle to produce uniform ribs.

FInishing

Press the clean tiles firmly into the ribbed adhesive bed with a sliding action to ensure maximum material contact.

Tap the tile faces gently with a rubber mallet to ensure perfect leveling and continuous bedding layout alignments.
Wipe away any excess adhesive material squeezing out into the open joint tracks using a damp sponge or cloth.
Allow the completed tile matrix to cure undisturbed for twenty-four hours before commencing joint grouting operations.

Surface Preparation

Clean the floor or wall concrete background thoroughly to eliminate all dust, dirt, loose plaster particles, oils, and grease.

Correct major surface irregularities, deep crevices, and layout depressions using a polymer-modified repair mortar.
Ensure that the target masonry substrate is completely dimensionally stable, flat, and fully cured before application.
Dampen highly porous or hot cement renders lightly with fresh water and wait for the surface moisture film to evaporate.

Application

Mix the dry tile adhesive powder slowly with a measured quantity of clean potable water using a mechanical stirrer tool.

Let the smooth, lump-free paste rest in the bucket for five minutes to mature, then give it a quick remix before use.
Spread the mixed adhesive paste firmly onto the structural surface using the flat edge of a suitable notched trowel.
Comb the wet mortar bed immediately with the notched side of the trowel at a sixty-degree angle to produce uniform ribs.

FInishing

Press the clean tiles firmly into the ribbed adhesive bed with a sliding action to ensure maximum material contact.

Tap the tile faces gently with a rubber mallet to ensure perfect leveling and continuous bedding layout alignments.
Wipe away any excess adhesive material squeezing out into the open joint tracks using a damp sponge or cloth.
Allow the completed tile matrix to cure undisturbed for twenty-four hours before commencing joint grouting operations.

Important Note

Surface Preparation

Surface Preparation

Apply only on properly prepared and structurally sound masonry backdrops. Follow recommended surface preparation and application practices to achieve optimum durability and a flawless finish.

Technical properties

Property	Description
Product Type	General Purpose Tile Adhesive
Appearance	Granular Powder
Finish	High-Strength Under-Tile Bed
Key Feature	Hydro Holder Strong Bond
Water Resistance	High
Open Time	Standard Workability Range
Curing Requirement	Self-Curing Formulation
Sag Resistance	Excellent
Application Method	Notched Trowel
Surface Compatibility	Concrete, Cement Plaster & Brick Masonry
Application Area	Interior Floors and Walls
Packing	Available in Standard Packs
Shelf Life	As per sealed pack conditions

Property	Description
Product Type	General Purpose Tile Adhesive
Appearance	Granular Powder
Finish	High-Strength Under-Tile Bed
Key Feature	Hydro Holder Strong Bond
Water Resistance	High
Open Time	Standard Workability Range
Curing Requirement	Self-Curing Formulation
Sag Resistance	Excellent
Application Method	Notched Trowel
Surface Compatibility	Concrete, Cement Plaster & Brick Masonry
Application Area	Interior Floors and Walls
Packing	Available in Standard Packs
Shelf Life	As per sealed pack conditions

Explore More of Sakarni's Catalogue

Explore More of Sakarni's Catalogue

Frequently Asked Questions

1. What is it used for?

2. Can it be used outdoors?

3. Do I need to soak the tiles in water before fixing them?

4. Is it ready to use or does it require mixing?

5. How long does it take to dry before walking on the floor?

Download our Apps

Sakarni Premium Club

iMIdAS-Sakarni Bandhan

Follow Our Journey

© 2026 All Rights Reserved. Sakarni Plaster Pvt Ltd. Cookie Preferences