SakTile Grout | Premium Tile Adhesives by Sakarni

SakTile Grout

High-Performance Cementitious Tile Joint Filler

SAKTILEGROUT is a professional-grade, polymer-modified cementitious tile joint filler engineered to provide high-strength bonding and smooth aesthetics for interior floor and wall tiles. Formulated with advanced active additives, it creates high-density, crack-free joints that resist water penetration and daily abrasion wear. It offers exceptional color stability and easy workability, making it a highly reliable and non-toxic maintenance solution for sealing modern building layouts.

Strong Bond
Strong Bond
Active Additives
Technology
Non Toxic
Non Toxic
Eco Friendly
Safe Formulation
0%
0%
Shrinkage
& Joint Cracking

Engineered to Protect Tile Joints from Cracking, Powdering & Water Penetration

Conventional Cement Mortars

Traditional systems often suffer from:

Severe drying shrinkage causing grout lines to crack and dislodge quickly
High water permeability leading to moisture seepage beneath tiled planes
Poor abrasion resistance resulting in rapid surface powdering and erosion

SakTile Grout

It is specially formulated to provide:

High polymer-modified mechanical grab ensuring un-yielding joint adhesion
Advanced non-shrink crystal matrix that eliminates hairline stress fractures
Specialized hydrophobic additives reducing surface water absorption effectively
Safe living conditions via a certified non-flammable, non-toxic formulation

Key Benefits

Key Benefits

Active additives strong bond
High density shrinkage resistance
Reliable water tracking defense
Non toxic safe chemistry
Non flammable user friendly
Smooth uniform joint finish

Active additives strong bond
High density shrinkage resistance
Reliable water tracking defense
Non toxic safe chemistry
Non flammable user friendly
Smooth uniform joint finish

Non toxic safe chemistry
Non flammable user friendly
Smooth uniform joint finish

where to use

1
Floor Installations
Ceramic and vitrified tile floors
High traffic residential hallways
Commercial real estate walkway layouts
2
Interior Walls
Residential kitchen tile dado lines
Household bathroom wall joints
Commercial washroom masonry layouts
3
Home Renovations
Restoring weathered crumbling joint tracks
Sealing newly tiled utility rooms
Refurbishing interior residential balconies

1
Floor Installations
Ceramic and vitrified tile floors
High traffic residential hallways
Commercial real estate walkway layouts
2
Interior Walls
Residential kitchen tile dado lines
Household bathroom wall joints
Commercial washroom masonry layouts
3
Home Renovations
Restoring weathered crumbling joint tracks
Sealing newly tiled utility rooms
Refurbishing interior residential balconies

application process

Surface Preparation

Ensure that the underlying tile adhesive has cured completely for at least twenty-four hours before commencing joint filling.

Clear the open tile joints thoroughly to remove all loose dust, tile spacers, construction debris, and residual bedding mortar.
Verify that the tile joint gaps are completely dry and uniform to prevent localized grout discoloration or curing issues.
Clean the decorative tile faces using a damp cloth or sponge to remove surface grit, then allow them to dry out fully.

Application

Mix the tile joint filler powder systematically with a measured volume of clean potable water until a smooth paste is achieved.

Let the homogeneous, lump-free paste mature inside the mixing bucket for five minutes, then remix briefly right before application.
Apply the mixed grout paste firmly across the tile tracks using a high-density rubber grout float at a forty-five-degree angle.
Pack the joint channels completely to ensure absolute depth filling, cutting away excess material diagonally with the float edge.

FInishing

Allow the applied joint filler to set slightly for ten to twenty minutes until it reaches a firm, non-sticky matte consistency.

Clean the decorative tile faces gently using a damp sponge in uniform circular movements to emulsify surface grout residues.
Wipe down the entire completed tiled plane diagonally with a clean, dry microfiber cloth to eliminate remaining dust haze.
Keep the freshly grouted layout protected from heavy site dust, moisture, and foot traffic for a minimum of twenty-four hours.

Surface Preparation

Ensure that the underlying tile adhesive has cured completely for at least twenty-four hours before commencing joint filling.

Clear the open tile joints thoroughly to remove all loose dust, tile spacers, construction debris, and residual bedding mortar.
Verify that the tile joint gaps are completely dry and uniform to prevent localized grout discoloration or curing issues.
Clean the decorative tile faces using a damp cloth or sponge to remove surface grit, then allow them to dry out fully.

Application

Mix the tile joint filler powder systematically with a measured volume of clean potable water until a smooth paste is achieved.

Let the homogeneous, lump-free paste mature inside the mixing bucket for five minutes, then remix briefly right before application.
Apply the mixed grout paste firmly across the tile tracks using a high-density rubber grout float at a forty-five-degree angle.
Pack the joint channels completely to ensure absolute depth filling, cutting away excess material diagonally with the float edge.

FInishing

Allow the applied joint filler to set slightly for ten to twenty minutes until it reaches a firm, non-sticky matte consistency.

Clean the decorative tile faces gently using a damp sponge in uniform circular movements to emulsify surface grout residues.
Wipe down the entire completed tiled plane diagonally with a clean, dry microfiber cloth to eliminate remaining dust haze.
Keep the freshly grouted layout protected from heavy site dust, moisture, and foot traffic for a minimum of twenty-four hours.

Important Note

Surface Preparation

Surface Preparation

Apply only on properly prepared and completely dry tile joint profiles. Follow recommended surface preparation and application practices to achieve optimum durability and a flawless finish.

Technical properties

Property	Description
Product Type	Polymer-Modified Joint Grout
Appearance	Fine Granular Powder
Finish	Smooth Crack-Free Joint
Key Feature	Active Additives Strong Bond
Toxicity Profile	Non-Toxic
Flammability	Non-Flammable
Water Resistance	High
Shrinkage Resistance	Excellent
Application Method	Rubber Grout Float or Squeegee
Surface Compatibility	Ceramic, Vitrified & Clay Tiles
Application Area	Interior Floors and Walls
Packing	Available in Standard Packs
Shelf Life	As per sealed pack conditions

Property	Description
Product Type	Polymer-Modified Joint Grout
Appearance	Fine Granular Powder
Finish	Smooth Crack-Free Joint
Key Feature	Active Additives Strong Bond
Toxicity Profile	Non-Toxic
Flammability	Non-Flammable
Water Resistance	High
Shrinkage Resistance	Excellent
Application Method	Rubber Grout Float or Squeegee
Surface Compatibility	Ceramic, Vitrified & Clay Tiles
Application Area	Interior Floors and Walls
Packing	Available in Standard Packs
Shelf Life	As per sealed pack conditions

Explore More of Sakarni's Catalogue

Explore More of Sakarni's Catalogue

Frequently Asked Questions

1. What is it used for?

2. Can it be used outdoors?

3. Does it crack or shrink inside the joint over time?

4. Is it ready to use or does it require mixing?

5. Is it safe for standard household environments?

6. How long before the grouted floor can handle foot traffic?

Download our Apps

Sakarni Premium Club

iMIdAS-Sakarni Bandhan

Follow Our Journey

© 2026 All Rights Reserved. Sakarni Plaster Pvt Ltd. Cookie Preferences