Sakcote-2K (15KG Combo Box)

All Products

Construction Chemicals

High-Volume Commercial Grade Structural Waterproofing Combo

SAKCOTE-2K 15 KG Combo Box is an elite, bulk-packaged commercial-grade waterproofing system designed for large-span projects and heavy structural arrays. It pairs a high-performance liquid acrylic polymer container (Component A) with a matched, high-purity cementitious powder bag (Component B) inside a single, unified transit box to establish a continuous, high-elasticity barrier over extensive footprints.

3X+
3X+
Elastomeric Flexible
Crack Bridging
0%
0%
Water Permeability
and Dampness
15 KG
15 KG
Heavy-Duty
Bulk Combo

Engineered To Protect Large-Span Concrete Slabs, Continuous Multi-Story Substrates & Deep Containment Tanks From High-Pressure Water Ingress

Conventional Waterproofing Slurries

Traditional systems often suffer from:

Brittleness leading to cracking during structural settlement
Poor adhesion causing the subsequent paint film to peel and blister
High vulnerability to fungal, algal, and microbial attacks

It is specially formulated to provide:

Moderate dampness treatment that arrests capillary moisture rise
Superior binding matrix that prevents paint peeling and blister formation
High resistance to microbes, mold, and environmental pathogens
Elastomeric flexibility that moves dynamically with the building substrate

Key Benefits

Advanced elastomeric moisture barrier
Eradicates paint blistering completely
High microbial growth resistance
Exceptional concrete substrate adhesion
Seamless dual-component formulation
Breathable yet waterproof layer

Advanced elastomeric moisture barrier
Eradicates paint blistering completely
High microbial growth resistance
Exceptional concrete substrate adhesion
Seamless dual-component formulation
Breathable yet waterproof layer

Exceptional concrete substrate adhesion
Seamless dual-component formulation
Breathable yet waterproof layer

where to use

1
Sunken Areas & Wet Rooms
Multi-unit apartment washroom baselines and floor grids
Commercial kitchen floors and high-volume wash areas
Large institutional utility rooms and massive shower recesses
2
Concrete Structures
Large underground and overhead community water tanks
Commercial swimming pool shells and water fountain reservoirs
Extensive open roof terrace slabs and deep building basements
3
Damp-Prone Walls
Full-length interior retaining walls facing high soil moisture
Extensive basement interior structural block walls
Continuous multi-story masonry interfaces requiring deep damp shields

1
Sunken Areas & Wet Rooms
Multi-unit apartment washroom baselines and floor grids
Commercial kitchen floors and high-volume wash areas
Large institutional utility rooms and massive shower recesses
2
Concrete Structures
Large underground and overhead community water tanks
Commercial swimming pool shells and water fountain reservoirs
Extensive open roof terrace slabs and deep building basements
3
Damp-Prone Walls
Full-length interior retaining walls facing high soil moisture
Extensive basement interior structural block walls
Continuous multi-story masonry interfaces requiring deep damp shields

application process

Step 1: Surface Preparation

Clean the concrete or masonry substrate thoroughly to remove all loose dirt, dust, laitance, oil, grease, and curing compounds.

Repair all structural cracks, Honeycombs, and deep voids using a polymer-modified mortar before applying the coating.
Wet down the surface completely with potable water to achieve a saturated surface dry condition without leaving standing puddles.
Ensure the ambient temperature is within the recommended operating range before beginning the application.

Step 2: Application

Pour the large Component A liquid container into a commercial mixing vessel, then gradually add the 15 kg Component B powder bag while blending thoroughly with a low-speed mechanical stirrer for 3-5 minutes.

Apply the mixed material evenly onto the pre-wetted substrate using a stiff-bristle brush, roller, or specialized spray equipment.
Lay down the first coat in a uniform direction and allow it to dry completely for four to six hours.
Apply the second coat perpendicular to the first coat to guarantee full, pinhole-free coverage across the entire area.

Step 3: Finishing / Curing

Protect the freshly coated surface from direct sunlight, heavy winds, and rainwater during the initial curing phase.

Allow the completed coating system to air-cure completely for at least forty-eight hours before putting it into light service.
Conduct a standard ponding test for wet areas after full cure to verify the seamless water tightness of the application.
Proceed with the installation of protective screeds, tiling, or decorative finishes as per the project requirements.

Step 1: Surface Preparation

Clean the concrete or masonry substrate thoroughly to remove all loose dirt, dust, laitance, oil, grease, and curing compounds.

Repair all structural cracks, Honeycombs, and deep voids using a polymer-modified mortar before applying the coating.
Wet down the surface completely with potable water to achieve a saturated surface dry condition without leaving standing puddles.
Ensure the ambient temperature is within the recommended operating range before beginning the application.

Step 2: Application

Pour the large Component A liquid container into a commercial mixing vessel, then gradually add the 15 kg Component B powder bag while blending thoroughly with a low-speed mechanical stirrer for 3-5 minutes.

Apply the mixed material evenly onto the pre-wetted substrate using a stiff-bristle brush, roller, or specialized spray equipment.
Lay down the first coat in a uniform direction and allow it to dry completely for four to six hours.
Apply the second coat perpendicular to the first coat to guarantee full, pinhole-free coverage across the entire area.

Step 3: Finishing / Curing

Protect the freshly coated surface from direct sunlight, heavy winds, and rainwater during the initial curing phase.

Allow the completed coating system to air-cure completely for at least forty-eight hours before putting it into light service.
Conduct a standard ponding test for wet areas after full cure to verify the seamless water tightness of the application.
Proceed with the installation of protective screeds, tiling, or decorative finishes as per the project requirements.

Important Note

Surface Preparation

Apply only on properly prepared and saturated surface dry masonry profiles. Follow recommended surface preparation and application practices to achieve optimum durability and a flawless finish.

Technical properties

Property	Description
Product Type	Two-Component Waterproofing Coating
Appearance	Smooth Liquid-Powder Slurry
Finish	Seamless Flexible Membrane
Key Feature	Polymer Modified Moisture Blocking
Weather Resistance	Excellent
Anti-Microbial Protection	Yes
Water Ingress Resistance	High
UV Resistance	Excellent
Application Method	Stiff Bristle Brush or Roller
Surface Compatibility	Concrete, Brick Masonry & Plasters
Application Area	Bathrooms, Tanks, and Internal Walls
Packing	15 kg Heavy-Duty Industrial Box (Liquid Container + Powder Bag)
Shelf Life	As per sealed pack conditions
Surface Coverage	Approx. 90 - 120 sq. ft. for 2 coats (Ideal for multi-room project completions)

Property	Description
Product Type	Two-Component Waterproofing Coating
Appearance	Smooth Liquid-Powder Slurry
Finish	Seamless Flexible Membrane
Key Feature	Polymer Modified Moisture Blocking
Weather Resistance	Excellent
Anti-Microbial Protection	Yes
Water Ingress Resistance	High
UV Resistance	Excellent
Application Method	Stiff Bristle Brush or Roller
Surface Compatibility	Concrete, Brick Masonry & Plasters
Application Area	Bathrooms, Tanks, and Internal Walls
Packing	15 kg Heavy-Duty Industrial Box (Liquid Container + Powder Bag)
Shelf Life	As per sealed pack conditions
Surface Coverage	Approx. 90 - 120 sq. ft. for 2 coats (Ideal for multi-room project completions)

Explore More of Sakarni's Catalogue

Frequently Asked Questions

1. What is it used for?

2. Can it be used outdoors?

3. Does it prevent paint peeling?

4. Is it ready to use or does it require mixing?

5. How many coats are required for effective performance?

Download our Apps

Sakarni Premium Club

iMIdAS-Sakarni Bandhan

High-Volume Commercial Grade Structural Waterproofing Combo

3X+

3X+

0%

0%

15 KG

15 KG

Get Technical Consultation

Engineered To Protect Large-Span Concrete Slabs, Continuous Multi-Story Substrates & Deep Containment Tanks From High-Pressure Water Ingress

Conventional Waterproofing Slurries

Traditional systems often suffer from:

Brittleness leading to cracking during structural settlement

Poor adhesion causing the subsequent paint film to peel and blister

High vulnerability to fungal, algal, and microbial attacks

Sakcote-2K (15KG Combo Box)

It is specially formulated to provide:

Moderate dampness treatment that arrests capillary moisture rise

Superior binding matrix that prevents paint peeling and blister formation

High resistance to microbes, mold, and environmental pathogens

Elastomeric flexibility that moves dynamically with the building substrate

Key Benefits

Key Benefits

Advanced elastomeric moisture barrier

Eradicates paint blistering completely

High microbial growth resistance

Exceptional concrete substrate adhesion

Seamless dual-component formulation

Breathable yet waterproof layer

Advanced elastomeric moisture barrier

Eradicates paint blistering completely

High microbial growth resistance

Exceptional concrete substrate adhesion

Seamless dual-component formulation

Breathable yet waterproof layer

Exceptional concrete substrate adhesion

Seamless dual-component formulation

Breathable yet waterproof layer

where to use

1

Sunken Areas & Wet Rooms

Multi-unit apartment washroom baselines and floor grids

Commercial kitchen floors and high-volume wash areas

Large institutional utility rooms and massive shower recesses

2

Concrete Structures

Large underground and overhead community water tanks

Commercial swimming pool shells and water fountain reservoirs

Extensive open roof terrace slabs and deep building basements

3

Damp-Prone Walls

Full-length interior retaining walls facing high soil moisture

Extensive basement interior structural block walls

Continuous multi-story masonry interfaces requiring deep damp shields

1

Sunken Areas & Wet Rooms

Multi-unit apartment washroom baselines and floor grids

Commercial kitchen floors and high-volume wash areas

Large institutional utility rooms and massive shower recesses

2

Concrete Structures

Large underground and overhead community water tanks

Commercial swimming pool shells and water fountain reservoirs

Extensive open roof terrace slabs and deep building basements

3

Damp-Prone Walls

Full-length interior retaining walls facing high soil moisture

Extensive basement interior structural block walls

Continuous multi-story masonry interfaces requiring deep damp shields

application process

Step 1: Surface Preparation

Clean the concrete or masonry substrate thoroughly to remove all loose dirt, dust, laitance, oil, grease, and curing compounds.

Repair all structural cracks, Honeycombs, and deep voids using a polymer-modified mortar before applying the coating.

Wet down the surface completely with potable water to achieve a saturated surface dry condition without leaving standing puddles.

Ensure the ambient temperature is within the recommended operating range before beginning the application.

Step 2: Application

Pour the large Component A liquid container into a commercial mixing vessel, then gradually add the 15 kg Component B powder bag while blending thoroughly with a low-speed mechanical stirrer for 3-5 minutes.

Apply the mixed material evenly onto the pre-wetted substrate using a stiff-bristle brush, roller, or specialized spray equipment.

Lay down the first coat in a uniform direction and allow it to dry completely for four to six hours.

Apply the second coat perpendicular to the first coat to guarantee full, pinhole-free coverage across the entire area.

Step 3: Finishing / Curing