Sak Efflori Prime

All Products

Construction Chemicals

Sak Efflori Prime

Anti-Efflorescence and Superior Undercoat Primer

SAKEFFLORI PRIME is a professional-grade, specialized undercoat primer engineered to combat white saltpetre growth and surface dampness on internal and external walls. Formulated with high-performance barrier polymers, it creates an impenetrable seal over porous cementitious substrates, trapping water-soluble salts deep within the masonry matrix. It active shields subsequent topcoats, preventing paint flaking, patchy discoloration, and blister formation while significantly enhancing finish coat adhesion.

100%
100%
Efflorescence
& Salt Shield
2X+
2X+
Topcoat Adhesion
Bond Strength
5 Year+
5 Year+
Paint Film
Blister Protection

Engineered to Protect Topcoat Paint Systems from Substrate Saltpetre & Chemical Peeling

Conventional Wall Primers

Traditional systems often suffer from:

Permeable crystalline structures that let subterranean salts pass through freely
High vulnerability to alkaline moisture resulting in topcoat paint saponification
Weak film tension that ruptures easily under localized hydrostatic pressure

It is specially formulated to provide:

High-density barrier technology that neutralizes migratory alkaline salts completely
Strong surface-binding matrix that halts topcoat peeling and paint blistering
Complete sealing performance that isolates finish paints from internal brick wall dampness
Superior opacity and leveling behavior that maximizes decorative topcoat coverage

Key Benefits

Blocks active white efflorescence
Prevents topcoat paint peeling
Outstanding alkaline substrate resistance
Enhances decorative paint coverage
Excellent deep sealing properties
Superior inter-coat paint adhesion

Blocks active white efflorescence
Prevents topcoat paint peeling
Outstanding alkaline substrate resistance
Enhances decorative paint coverage
Excellent deep sealing properties
Superior inter-coat paint adhesion

Enhances decorative paint coverage
Excellent deep sealing properties
Superior inter-coat paint adhesion

where to use

1
Salt-Prone Masonry
Plastered surfaces exhibiting white powder growth
Ground floor interior walls facing rising dampness
Masonry substrates adjacent to plumbing conduits
2
Exterior Facades
Weather-exposed exterior plaster boundary walls
Rain-facing concrete block building envelopes
Parapets and balcony structural wall surfaces
3
Interior Refurbishments
Pre-painting primer coat over cured wall putty
Restorative sealing layer for older weathered plaster
Base priming under high-end premium internal emulsions

1
Salt-Prone Masonry
Plastered surfaces exhibiting white powder growth
Ground floor interior walls facing rising dampness
Masonry substrates adjacent to plumbing conduits
2
Exterior Facades
Weather-exposed exterior plaster boundary walls
Rain-facing concrete block building envelopes
Parapets and balcony structural wall surfaces
3
Interior Refurbishments
Pre-painting primer coat over cured wall putty
Restorative sealing layer for older weathered plaster
Base priming under high-end premium internal emulsions

application process

Step 1: Surface Preparation

Clean the targeted masonry wall layout thoroughly to eradicate loose dirt, dust, residual grease, and crumbling paint layers.

Scrape away existing structural saltpetre deposits and efflorescence crystal layers completely using a stiff wire brush.
Wash the area down with fresh potable water to remove loosened salts and allow it to dry out completely.
Repair deep substrate holes, structural cracks, and plaster imperfections with an appropriate modified mortar before priming.

Step 2: Application

Stir the single-component anti-efflorescence primer container thoroughly to guarantee a homogeneous fluid consistency.

Dilute the material with clean potable water only in strict accordance with the recommended product guidelines.
Apply a uniform, full coat onto the dry wall surface using a premium brush, roller, or mechanical spray unit.
Ensure uniform cross-directional sweeps to achieve absolute film continuity without any thin or missed segments.

Step 3: Finishing / Curing

Allow the applied priming barrier coat to cure and dry completely for four to six hours under ambient conditions.

Check the dried surface to ensure a consistent, matte layer has formed over the cementitious substrate profiling.
Clean all used brushes, rollers, and application containers cleanly using fresh tap water immediately after completing the task.
Apply the final premium decorative emulsion or exterior topcoat layers over the stabilized, primed background layout.

Step 1: Surface Preparation

Clean the targeted masonry wall layout thoroughly to eradicate loose dirt, dust, residual grease, and crumbling paint layers.

Scrape away existing structural saltpetre deposits and efflorescence crystal layers completely using a stiff wire brush.
Wash the area down with fresh potable water to remove loosened salts and allow it to dry out completely.
Repair deep substrate holes, structural cracks, and plaster imperfections with an appropriate modified mortar before priming.

Step 2: Application

Stir the single-component anti-efflorescence primer container thoroughly to guarantee a homogeneous fluid consistency.

Dilute the material with clean potable water only in strict accordance with the recommended product guidelines.
Apply a uniform, full coat onto the dry wall surface using a premium brush, roller, or mechanical spray unit.
Ensure uniform cross-directional sweeps to achieve absolute film continuity without any thin or missed segments.

Step 3: Finishing / Curing

Allow the applied priming barrier coat to cure and dry completely for four to six hours under ambient conditions.

Check the dried surface to ensure a consistent, matte layer has formed over the cementitious substrate profiling.
Clean all used brushes, rollers, and application containers cleanly using fresh tap water immediately after completing the task.
Apply the final premium decorative emulsion or exterior topcoat layers over the stabilized, primed background layout.

Important Note

Surface Preparation

Apply only on properly prepared and fully dried undercoat masonry profiles. Follow recommended surface preparation and application practices to achieve optimum durability and a flawless finish.

Technical properties

Property	Description
Product Type	Anti-Efflorescence Primer
Appearance	White Viscous Liquid
Finish	Smooth Solid Undercoat
Key Feature	Crystalline Salt-Blocking Shield
Weather Resistance	Excellent
Alkali Resistance	High-Build Chemical Resistance
Water Ingress Resistance	Complete Protective Seal
Opacity Level	Excellent
Application Method	Brush, Roller, or Spray
Surface Compatibility	Cement Plaster, Putty, Concrete & Brickwork
Application Area	Interior and Exterior Wall Surfaces
Packing	Available in Standard Packs
Shelf Life	As per sealed pack conditions

Property	Description
Product Type	Anti-Efflorescence Primer
Appearance	White Viscous Liquid
Finish	Smooth Solid Undercoat
Key Feature	Crystalline Salt-Blocking Shield
Weather Resistance	Excellent
Alkali Resistance	High-Build Chemical Resistance
Water Ingress Resistance	Complete Protective Seal
Opacity Level	Excellent
Application Method	Brush, Roller, or Spray
Surface Compatibility	Cement Plaster, Putty, Concrete & Brickwork
Application Area	Interior and Exterior Wall Surfaces
Packing	Available in Standard Packs
Shelf Life	As per sealed pack conditions

Explore More of Sakarni's Catalogue

Frequently Asked Questions

1. What is it used for?

2. Can it be used outdoors?

3. Does it stop paint from peeling off the walls?

4. Is it ready to use or does it require mixing?

5. How does it eliminate white saltpetre growth?

Download our Apps

Sakarni Premium Club

iMIdAS-Sakarni Bandhan

Anti-Efflorescence and Superior Undercoat Primer

100%

100%

2X+

2X+

5 Year+

5 Year+

Get Technical Consultation

Engineered to Protect Topcoat Paint Systems from Substrate Saltpetre & Chemical Peeling

Conventional Wall Primers

Traditional systems often suffer from:

Permeable crystalline structures that let subterranean salts pass through freely

High vulnerability to alkaline moisture resulting in topcoat paint saponification

Weak film tension that ruptures easily under localized hydrostatic pressure

Sak Efflori Prime

It is specially formulated to provide:

High-density barrier technology that neutralizes migratory alkaline salts completely

Strong surface-binding matrix that halts topcoat peeling and paint blistering

Complete sealing performance that isolates finish paints from internal brick wall dampness

Superior opacity and leveling behavior that maximizes decorative topcoat coverage

Key Benefits

Key Benefits

Blocks active white efflorescence

Prevents topcoat paint peeling

Outstanding alkaline substrate resistance

Enhances decorative paint coverage

Excellent deep sealing properties

Superior inter-coat paint adhesion

Blocks active white efflorescence

Prevents topcoat paint peeling

Outstanding alkaline substrate resistance

Enhances decorative paint coverage

Excellent deep sealing properties

Superior inter-coat paint adhesion

Enhances decorative paint coverage

Excellent deep sealing properties

Superior inter-coat paint adhesion

where to use

1

Salt-Prone Masonry

Plastered surfaces exhibiting white powder growth

Ground floor interior walls facing rising dampness

Masonry substrates adjacent to plumbing conduits

2

Exterior Facades

Weather-exposed exterior plaster boundary walls

Rain-facing concrete block building envelopes

Parapets and balcony structural wall surfaces

3

Interior Refurbishments

Pre-painting primer coat over cured wall putty

Restorative sealing layer for older weathered plaster

Base priming under high-end premium internal emulsions

1

Salt-Prone Masonry

Plastered surfaces exhibiting white powder growth

Ground floor interior walls facing rising dampness

Masonry substrates adjacent to plumbing conduits

2

Exterior Facades

Weather-exposed exterior plaster boundary walls

Rain-facing concrete block building envelopes

Parapets and balcony structural wall surfaces

3

Interior Refurbishments

Pre-painting primer coat over cured wall putty

Restorative sealing layer for older weathered plaster

Base priming under high-end premium internal emulsions

application process

Step 1: Surface Preparation

Clean the targeted masonry wall layout thoroughly to eradicate loose dirt, dust, residual grease, and crumbling paint layers.

Scrape away existing structural saltpetre deposits and efflorescence crystal layers completely using a stiff wire brush.

Wash the area down with fresh potable water to remove loosened salts and allow it to dry out completely.

Repair deep substrate holes, structural cracks, and plaster imperfections with an appropriate modified mortar before priming.

Step 2: Application

Stir the single-component anti-efflorescence primer container thoroughly to guarantee a homogeneous fluid consistency.

Dilute the material with clean potable water only in strict accordance with the recommended product guidelines.

Apply a uniform, full coat onto the dry wall surface using a premium brush, roller, or mechanical spray unit.

Ensure uniform cross-directional sweeps to achieve absolute film continuity without any thin or missed segments.

Step 3: Finishing / Curing