Khara Gypsum Plaster

All Products

Gypsum & Plaster

High-Purity B-Hemihydrate Type A Structural Gypsum Plaster

Khara Gypsum Plaster is a professional-grade, high-purity B-hemihydrate Type A gypsum plaster engineered to provide an ultra-smooth, perfectly leveled, and crack-free interior surface lining directly over internal masonry walls and concrete ceilings. Formulated with premium-grade natural gypsum mineral bases, it features optimum water-retention properties and controlled setting kinetics that minimize application shrinkage while maximizing working time. It serves as a superior single-coat plaster solution that replaces traditional sand-cement rendering systems, completely eliminating the need for separate water curing while drastically speeding up internal layout project timelines.

Type A
Type A
Premium B Hemihydrate
Purity Formulation
0%
0%
Water Curing
& Paint Blistering Vulnerability
Smooth
Smooth
High-Coverage Leveling
& Crack Resistance

Engineered to Protect Internal Walls from Surface Cracking, Rough Finishes & Extended Project Delays

Conventional Sand-Cement Plasters

Traditional systems often suffer from:

Developing extensive hairline shrinkage cracks, map cracking, and structural crazing patterns during drying out phases
Requiring extensive water curing over seven to fourteen days, creating severe site delays and internal layout moisture traps
Yielding rough, highly uneven surface profiles that require heavy, multi-layer wall putty smoothing before paint primer application

It is specially formulated to provide:

High-density dimensional stability that sets without showing surface shrinkage hairline fractures
Completely elimination of water curing steps, allowing internal surfaces to dry out cleanly for immediate paint readiness
Ultra-white, flat, marble-smooth surface profiles that accept high-end decorative paints without heavy putty bases
Natural low thermal conductivity parameters that lower building structure transmission heat loads internally

Key Benefits

Premium high-purity B-hemihydrate base
Single-coat internal layout leveling action
Eliminates messy onsite water curing steps
Complete protection against shrinkage cracks
Superb, flat paint-ready finish smoothness
Excellent natural thermal insulation profile

Premium high-purity B-hemihydrate base
Single-coat internal layout leveling action
Eliminates messy onsite water curing steps
Complete protection against shrinkage cracks
Superb, flat paint-ready finish smoothness
Excellent natural thermal insulation profile

Complete protection against shrinkage cracks
Superb, flat paint-ready finish smoothness
Excellent natural thermal insulation profile

where to use

1
Direct Brick & Blockwork Undercoats
Leveling single-coat internal plaster lines directly over solid clay bricks
High-adhesion wall leveling over interior light fly-ash brick layouts
Smooth surface structural linings over internal concrete block wall expanses
2
High-End Drylining Backdrops
Preparing ultra-flat wall under-planes for luxury wallpaper hanging grids
Leveling background surfaces before installing intricate interior molding designs
Base lining preparation prior to interior accent wall wood framing panel clips
3
Direct Concrete Slab Coatings
Overhead ceiling skim plastering directly beneath raw interior concrete roof slabs
Surface leveling profiles over internal monolithic concrete column structures
Seamless flush paneling layouts for multi-story residential building interiors

1
Direct Brick & Blockwork Undercoats
Leveling single-coat internal plaster lines directly over solid clay bricks
High-adhesion wall leveling over interior light fly-ash brick layouts
Smooth surface structural linings over internal concrete block wall expanses
2
High-End Drylining Backdrops
Preparing ultra-flat wall under-planes for luxury wallpaper hanging grids
Leveling background surfaces before installing intricate interior molding designs
Base lining preparation prior to interior accent wall wood framing panel clips
3
Direct Concrete Slab Coatings
Overhead ceiling skim plastering directly beneath raw interior concrete roof slabs
Surface leveling profiles over internal monolithic concrete column structures
Seamless flush paneling layouts for multi-story residential building interiors

application process

Surface Preparation

Clean the target interior brickwork, concrete block, or raw concrete ceiling plane thoroughly to remove all loose dust, chemical release oils, efflorescence salts, and concrete slag.

Ensure that the base substrate layout is entirely rigid, structurally stable, fully cured, and structurally free from live dampness leaks.
Pre-fix standard vertical alignment dabs or level strips across the wall layout to establish absolute vertical correctness and uniform plaster thickness parameters.
Apply a high-grip bonding agent over exceptionally smooth, non-porous concrete surfaces before plastering to optimize mechanical anchor adhesion.

Mixing & Application

Pour fresh potable water into a clean mixing vessel, then gradually sprinkle the Khara Gypsum Plaster powder into the water in the recommended mixing ratio.

Blend the mixture thoroughly using a low-speed mechanical mixer or manual paddle for 2–3 minutes until a smooth, completely uniform, lump-free paste layout is achieved.
Apply the mixed plaster slurry firmly onto the substrate using a clean aluminum trowel or standard plastering blade, working systematically from the wall base upward.
Level the applied paste tightly along the pre-set alignment dabs using an aluminum straight-edge box section to establish a true vertical surface plane.

Final Finishing

Allow the leveled plaster layer to set slightly, then run a steel polishing trowel smoothly over the face to form an ultra-flat, glossy finish.

Trim off any localized minor profile ridges or micro-imperfections cleanly before the plaster grid reaches its absolute final chemical set layout.
Let the completed gypsum plaster surface air-dry naturally under completely dry, ventilated room site environments for a period of 72 hours.
Ensure that the plaster face has dried to its full structural whiteness and exhibits zero internal core moisture before beginning paint or primer decorations.

Surface Preparation

Clean the target interior brickwork, concrete block, or raw concrete ceiling plane thoroughly to remove all loose dust, chemical release oils, efflorescence salts, and concrete slag.

Ensure that the base substrate layout is entirely rigid, structurally stable, fully cured, and structurally free from live dampness leaks.
Pre-fix standard vertical alignment dabs or level strips across the wall layout to establish absolute vertical correctness and uniform plaster thickness parameters.
Apply a high-grip bonding agent over exceptionally smooth, non-porous concrete surfaces before plastering to optimize mechanical anchor adhesion.

Mixing & Application

Pour fresh potable water into a clean mixing vessel, then gradually sprinkle the Khara Gypsum Plaster powder into the water in the recommended mixing ratio.

Blend the mixture thoroughly using a low-speed mechanical mixer or manual paddle for 2–3 minutes until a smooth, completely uniform, lump-free paste layout is achieved.
Apply the mixed plaster slurry firmly onto the substrate using a clean aluminum trowel or standard plastering blade, working systematically from the wall base upward.
Level the applied paste tightly along the pre-set alignment dabs using an aluminum straight-edge box section to establish a true vertical surface plane.

Final Finishing

Allow the leveled plaster layer to set slightly, then run a steel polishing trowel smoothly over the face to form an ultra-flat, glossy finish.

Trim off any localized minor profile ridges or micro-imperfections cleanly before the plaster grid reaches its absolute final chemical set layout.
Let the completed gypsum plaster surface air-dry naturally under completely dry, ventilated room site environments for a period of 72 hours.
Ensure that the plaster face has dried to its full structural whiteness and exhibits zero internal core moisture before beginning paint or primer decorations.

Important Note

Surface Preparation

Apply exclusively across completely covered internal wall and ceiling building partitions. Never introduce any extra sand, cement, or external chemical additives into the high-purity gypsum slurry matrix. Follow recommended surface preparation and application practices to achieve optimum durability and a flawless finish.

Technical properties

Property	Description
Product Type	B-Hemihydrate Type A Gypsum Plaster
Appearance	Fine Pure White Dry Powder
Finish	Smooth, Flat Matte to Semi-Glossy Core
Key Feature	Zero Shrikage High-Purity Internal Leveling
Water Curing Requirement	None (Air Curing Only)
Setting Time (Initial / Final)	Optimized Controlled Setting Range
Thermal Conductivity	Low Thermal Transmission Index
Dry Bulk Density	Balanced Structural Weight Profile
Application Method	Manual Troweling & Straight-Edge Leveling
Surface Compatibility	Clay Bricks, Fly-Ash Bricks, Concrete Slabs & AAC Blocks
Application Area	Interior Living Walls, Ceilings & Structural Columns
Packing Options	Standard Moisture-Proof Industrial Valve Bags
Shelf Life	Durable under completely dry, elevated pallet storage conditions

Property	Description
Product Type	B-Hemihydrate Type A Gypsum Plaster
Appearance	Fine Pure White Dry Powder
Finish	Smooth, Flat Matte to Semi-Glossy Core
Key Feature	Zero Shrikage High-Purity Internal Leveling
Water Curing Requirement	None (Air Curing Only)
Setting Time (Initial / Final)	Optimized Controlled Setting Range
Thermal Conductivity	Low Thermal Transmission Index
Dry Bulk Density	Balanced Structural Weight Profile
Application Method	Manual Troweling & Straight-Edge Leveling
Surface Compatibility	Clay Bricks, Fly-Ash Bricks, Concrete Slabs & AAC Blocks
Application Area	Interior Living Walls, Ceilings & Structural Columns
Packing Options	Standard Moisture-Proof Industrial Valve Bags
Shelf Life	Durable under completely dry, elevated pallet storage conditions

Explore More of Sakarni's Catalogue

Frequently Asked Questions

What is it used for?

2. Can it be applied on exterior building walls?

3. Does this plaster require water curing after application?

4. Can I mix cement or structural adhesives into it to make it stronger?

5. How thick can this plaster be applied in a single coat layout?

Download our Apps

Sakarni Premium Club

iMIdAS-Sakarni Bandhan

High-Purity B-Hemihydrate Type A Structural Gypsum Plaster

Type A

Type A

0%

0%

Smooth

Smooth

Get Technical Consultation

Engineered to Protect Internal Walls from Surface Cracking, Rough Finishes & Extended Project Delays

Conventional Sand-Cement Plasters

Traditional systems often suffer from:

Developing extensive hairline shrinkage cracks, map cracking, and structural crazing patterns during drying out phases

Requiring extensive water curing over seven to fourteen days, creating severe site delays and internal layout moisture traps

Yielding rough, highly uneven surface profiles that require heavy, multi-layer wall putty smoothing before paint primer application

Khara Gypsum Plaster

It is specially formulated to provide:

High-density dimensional stability that sets without showing surface shrinkage hairline fractures

Completely elimination of water curing steps, allowing internal surfaces to dry out cleanly for immediate paint readiness

Ultra-white, flat, marble-smooth surface profiles that accept high-end decorative paints without heavy putty bases

Natural low thermal conductivity parameters that lower building structure transmission heat loads internally

Key Benefits

Key Benefits

Premium high-purity B-hemihydrate base

Single-coat internal layout leveling action

Eliminates messy onsite water curing steps

Complete protection against shrinkage cracks

Superb, flat paint-ready finish smoothness

Excellent natural thermal insulation profile

Premium high-purity B-hemihydrate base

Single-coat internal layout leveling action

Eliminates messy onsite water curing steps

Complete protection against shrinkage cracks

Superb, flat paint-ready finish smoothness

Excellent natural thermal insulation profile

Complete protection against shrinkage cracks

Superb, flat paint-ready finish smoothness

Excellent natural thermal insulation profile

where to use

1

Direct Brick & Blockwork Undercoats

Leveling single-coat internal plaster lines directly over solid clay bricks

High-adhesion wall leveling over interior light fly-ash brick layouts

Smooth surface structural linings over internal concrete block wall expanses

2

High-End Drylining Backdrops

Preparing ultra-flat wall under-planes for luxury wallpaper hanging grids

Leveling background surfaces before installing intricate interior molding designs

Base lining preparation prior to interior accent wall wood framing panel clips

3

Direct Concrete Slab Coatings

Overhead ceiling skim plastering directly beneath raw interior concrete roof slabs

Surface leveling profiles over internal monolithic concrete column structures

Seamless flush paneling layouts for multi-story residential building interiors

1

Direct Brick & Blockwork Undercoats

Leveling single-coat internal plaster lines directly over solid clay bricks

High-adhesion wall leveling over interior light fly-ash brick layouts

Smooth surface structural linings over internal concrete block wall expanses

2

High-End Drylining Backdrops

Preparing ultra-flat wall under-planes for luxury wallpaper hanging grids

Leveling background surfaces before installing intricate interior molding designs

Base lining preparation prior to interior accent wall wood framing panel clips

3

Direct Concrete Slab Coatings

Overhead ceiling skim plastering directly beneath raw interior concrete roof slabs

Surface leveling profiles over internal monolithic concrete column structures

Seamless flush paneling layouts for multi-story residential building interiors

application process

Surface Preparation

Clean the target interior brickwork, concrete block, or raw concrete ceiling plane thoroughly to remove all loose dust, chemical release oils, efflorescence salts, and concrete slag.

Ensure that the base substrate layout is entirely rigid, structurally stable, fully cured, and structurally free from live dampness leaks.

Pre-fix standard vertical alignment dabs or level strips across the wall layout to establish absolute vertical correctness and uniform plaster thickness parameters.

Apply a high-grip bonding agent over exceptionally smooth, non-porous concrete surfaces before plastering to optimize mechanical anchor adhesion.

Mixing & Application

Pour fresh potable water into a clean mixing vessel, then gradually sprinkle the Khara Gypsum Plaster powder into the water in the recommended mixing ratio.

Blend the mixture thoroughly using a low-speed mechanical mixer or manual paddle for 2–3 minutes until a smooth, completely uniform, lump-free paste layout is achieved.

Apply the mixed plaster slurry firmly onto the substrate using a clean aluminum trowel or standard plastering blade, working systematically from the wall base upward.

Level the applied paste tightly along the pre-set alignment dabs using an aluminum straight-edge box section to establish a true vertical surface plane.

Final Finishing